Forum

Welcome Guest.
Please login or register.
Did you miss your activation email?


Author Topic: Cascading disecq  (Read 3350 times)

Satellite_fta

  • Newbie

  • Offline
  • *

  • 7
  • Karma:
    +0/-0
Cascading disecq
« on: June 12, 2015, 11:45 pm »
I would like to use disecq switchs in cascade in order to use more LNB with my receiver.

What setting should I use in my receiver ? Is it possible to cascade any disecq switch with any other ?

Jorgek

  • Jr. Member

  • Offline
  • **

  • 54
  • Karma:
    +0/-0
Re: Cascading disecq
« Reply #1 on: June 14, 2015, 04:56 pm »
It depends on what your configuration is.  The simple answer is no to cascading the switches.  Most diseqc are 1x2 and 1x4 and 1x8. Chances are you are not connecting more than 8 LNBs to one receiver.
You can also use a 22khz switch and control 2 separate diseqc switches.
FTA: Openbox S9, 33" dish on Stab 90 HH, Avenger PLL LNB.  Spare 33" with Avenger PLL LNB.  25" at 30W, GeoSatPro  PLL LNB.
OTA: CM4221 at 35 ft. HW-150 PVR.

 

We serve Oakville | Burlington | Milton | Mississauga | Hamilton | Georgetown | Acton | Halton | Toronto
Copyright © 2015 Dr.Sat - The Satellite Doctor. All rights reserved.