Dr. Sat discussion forum

Television sources => Free to Air (FTA) Satelilte Television => Topic started by: Satellite_fta on June 12, 2015, 11:45 pm

Title: Cascading disecq
Post by: Satellite_fta on June 12, 2015, 11:45 pm

I would like to use disecq switchs in cascade in order to use more LNB with my receiver.

What setting should I use in my receiver ? Is it possible to cascade any disecq switch with any other ?

Title: Re: Cascading disecq
Post by: Jorgek on June 14, 2015, 04:56 pm

It depends on what your configuration is.  The simple answer is no to cascading the switches.  Most diseqc are 1x2 and 1x4 and 1x8. Chances are you are not connecting more than 8 LNBs to one receiver.
You can also use a 22khz switch and control 2 separate diseqc switches.